Shopping Cart
154 Gallon Capacity Concrete Washout and Waste Disposal Steel Pan
154 Gallon Capacity Concrete Washout and Waste Disposal Steel Pan
154 Gallon Capacity Concrete Washout and Waste Disposal Steel Pan
Steel secondary containment utility pan for concrete washout
WASHOUTPAN HD 154 GAL. 72"x72"x14"
154 Gallon Capacity Concrete Washout and Waste Disposal Steel Pan Load Tested
Steel secondary containment utility pan for concrete washout
154 Gallon Capacity Concrete Washout and Waste Disposal Steel Pan
154 Gallon Capacity Concrete Washout and Waste Disposal Steel Pan
154 Gallon Capacity Concrete Washout and Waste Disposal Steel Pan
Steel secondary containment utility pan for concrete washout
WASHOUTPAN HD 154 GAL. 72"x72"x14"
154 Gallon Capacity Concrete Washout and Waste Disposal Steel Pan Load Tested
Steel secondary containment utility pan for concrete washout

WASHOUTPAN HD 154 GAL. 72"x72"x14"

$1,599.00

WASHOUT PAN HD™ Model 727214HD

View Load Test Certificate HERE

  • Size: 72" L x 72" W x 14" H
  • Capacity:154 Gallons
  • Four Point Lifting EYE: 3/4” ASTM A572 Rated for 3,000 LB / EYE
  • Tare Weight: 901 LB. 
  • Load Tested at 36,500 LB by a certified CAL/OSHA testing facility and technician. 
  • Certified Single Load 17,500 LB, Spreader Load 23,000 LB.
  • ASME Design of Below the Hook Lifting Devices
  • Fabricated in North America with ASTM Material Grades: Plate A36, Pad Eye Plate A572 Gr.50, Channel A36, Weld AWS E70X

WASHOUT PAN’s trusted Heavy Duty “HD” series pans are engineered to last. Designed to capture and collect liquids and solids from concrete washout and exceed regulatory compliance. The HD series features four 3/4” ASTM A-572 Grade 50 Material lifting eyes, 1/4 “ steel floors, tapered walls and a flat floor. It also has reinforced forklift channels for lifting the pan upside down to release materials.

The 14” pan can be placed under concrete pump trucks during use and after use to collect washout materials discharged from hoppers during washout. In addition to concrete mixer and pump trucks, pans can also be used for other trades and secondary containment. We recommend spraying the inside of each pan with a form oil before use to prevent material from sticking. Keep washout material clean for recycling and refrain from using a plastic liner.

ASTM A572 Grade 50 is considered a “workhorse” grade and is widely used in many applications. Steel mills produce channel and heavy beams with Grade 50. It is commonly used in structural applications, heavy construction equipment, building structures, heavy duty anchoring systems, truck frames, poles, liners, conveyors, boom sections, structural steel shapes, and applications that require high strength per weight ratio.

Washout Pan™ is one component of the overall lifting system. All components of the lifting system must be be reviewed, designed, & signed off by a qualified engineer prior to use.

Download Engineering Calculation Packets
Certified Small Business Certificate
SAFETY

WASHOUT PAN™ SAFETY & PRODUCT USE SAFETY WARNING

Current Load Test Data:
TRADEMARK HOIST, INC
CAL/OSHA # CA-296
1369 RIDGEWAY STREET
POMONA, CALIFORNIA 91768
(909) 455-0801
TEST DATE: 01/29/2019
LOAD TEST WEIGHT 36,500 LBS
Limitations:
SINGLE LOAD 17,500 LBS. 
SPREADER LOAD 23,000 LBS.
Certificate(s)  TM29646-00
DEVCO Engineering inc.
541-757-8991
Mail: P.O. Box 1211, Corvallis, OR 97339
Office: 245 NE Conifer Blvd., Corvallis, OR 97330
Washout Pan™ is one component of the overall lifting system. 
all components of the lifting system must be be reviewed, designed, & signed off by a qualified engineer prior to use.
Inspection Requirements per ASME B30.20: Before and during each lift made by the lifter, Frequent inspection, Periodic inspection.  Operator should inspect the Washout Pan before and during each lift made by the lifter.  Visual examinations by the operator or other designated person(s) with records not required: Normal Service – Monthly, Heavy Service – Weekly to Monthly, Severe Service – Daily to Weekly, Special or Infrequent Service – As recommended by a qualified person before and after each occurrence.
DO NOT Lift people.
DO NOT Leave suspended.
DO NOT Make any alterations or repairs.
DO NOT Lift loads higher than necessary.
DO NOT Lift suspended loads over people.
DO NOT Get in the way of the suspended loads.
DO NOT Remove or obscuring warning labels.
DO NOT Fill more than 3/4 of listed volume capacity.
DO NOT Operate a damaged pan, or a pan with missing parts.
DO NOT Use without being certified to do so.
DO NOT Exceed the rated load, or lifting loads other than trade washout.
 

All products fabricated by Washout Pan™ are sold with the express understanding that the purchaser & user are thoroughly familiar with the safe use, proper care, and application of the Washout Pan. 

The user is responsible for the safe use, proper care, and application.

Failure of the product can occur due to misapplication, abuse, overloading, improper care, or lack of maintenance. 

There are numerous government and industry standards that covers below the hook lifting equipment. This safety document makes no attempt to reference all applicable rules and regulations or the purchasers and users company safety policies. Washout Pan does reference industry standards including ASME B30.20 ASME BTH-1.

Load test ratings provided by Washout Pan are only applicable to like new condition products.

Washout Pan's confidential & proprietary Devco Engineering Calculation Packets ore provided on a case by case basis to be use only for safety requirements - No duplication, publication or other use is allowed.  Load test data is per model, not each pan.

All nameplates, warning labels must be visible. Contact Washout Pan to replace labels for a fee.

Please read our warranty and register your product with 30 days. Warranty is NOT transferable. Authorized retailers include Pro Line, WYLCO Supply, Amazon & Washout Pan.

FULLY ENCLOSED HEADRAIL FOR STRUCTURAL INTEGRITY.


PRO SERIES FEATURE 5 U.S.A. STAMPED D RINGS. HD/MAX SERIES FEATURE 4 ASTM GRADE LIFTING EYES.